This product is packed in a 20 kg pail. Flexible, 2-component sealing layer for cellar exterior walls, foundations and concrete constructions.
Against soil moisture, ascents and pressurized water. Tested according to EN 15814.
Can be universally used as bonding bridge, sealing for surfaces and plinths as a horizontal seal and for bonding drainage or insulation boards.
Easy to process: rolls, brushes or sputtering. Fast curing: suitable for work under time pressure.
Good adhesion on both mineral and bituminous substrates. Diffusion open. Frost, UV and weather resistant.
Large percentage of wet film thickness remains as dry film thickness, ie approx. 90%. Inside, outside, wall, floor.
For crack-bridging sealing of structures above and below ground level, new construction and renovation, against soil moisture, rising and pressing water.
For cellar walls, base plates, foundations, balconies and terraces. For water tanks and pipes up to a filling height of 6 meters.
As a horizontal seal under walls against water rising through the cappilaries. For bonding protection drainage and insulation boards.
Consumption: 2.5 kg / m² with 2 mm dry layer thickness (2.3 mm wet layer thickness). 3.2 kg / m² at 2.5 mm dry layer thickness (3 mm wet layer thickness).