PCI Flexmörtel S2
This product is packed in a 20 kg bag.
PCI Flexmörtel S2 is a flexible tile adhesive for all ceramic tiles.
Steady, heavy bottom plates do not sink.
Very deformable, compensates for temperature changes and substrate stress.
High bond strength, obtains twice as much strength as required.
Very low emission, GEV EMICODE EC1 Plus R.
Adhesive bed thickness 1 - 10 mm.
Chromate arm according to TRGS 613.
Waterproof and temperature resistant from -30 ° C of + 80 ° C.
Application area: Inside, outside, floor, wall.
For bonding on cement screeds that are> at least 3 days old (as soon as walkable) *.
For bonding mainly large format tiles on underfloor heating.
Especially for bonding tiles and plates outside; replaces the buttering-floating method.
For the bonding of ceramics, mosaic, clinkers and tiles with low water absorption.
For bonding in swimming pools, on platforms, in wet areas and in cold rooms.
For bonding on cement and gypsum-based surfaces and hard foam panels.
For bonding ceramics to waterproofing layers and decoupling strips from PCI.
For smoothing out and leveling out minor unevenness on walls and floors, for bonding tiles and slabs.
Meets C2TE S2 according to EN 12004 and German "Richtlinie für Flexmörtel".
|Required notch size||Consumption||20 kg|
|6 mm||2,2 kg||9,1 m²|
|8 mm||2,6 kg||7,7 m²|
|10 mm||2,9 kg||6,9 m²|
|10/20 round notch||3,4 kg||5,9 m²|
|Sub Title||Tile adhesive.|
|Meta Title||PCI Flexmörtel S2|